Lithium-Ion Battery Charging Safety Cabinet – P1000T1 – RT362 – G806+LI10

Lithium-Ion Battery Charging Safety Cabinet – P1000T1 – RT362

Industrial lithium-ion battery charging safety cabinet designed for controlled charging and storage of removable batteries. Made in France and available from SALESBRIDGES for workshops, warehouses and industrial facilities.

Why extra charging safety matters

Damaged or overheating lithium-ion batteries can undergo thermal runaway, releasing heat, fire, toxic gases and fragments. Charging requires early detection, electrical isolation, fire protection and suitable extraction.

Eight important RT362 safety functions

• Connected smoke and heat alarm: warns personnel and configured connected users when abnormal conditions are detected.
• Door-open alarm: after 60 seconds, an audible/visual alert and automatic interruption of charging power.
• Automatic electrical shutdown: cuts power to chargers during an incident; this cannot stop a thermal runaway that has already begun.
• Automatic fire-extinguishing equipment: intended to help limit flames and propagation.
• Flame protection: shield designed to cool escaping hot gases and limit flames outside the cabinet.
• Anti-ballistic grid: helps contain hot fragments and projectiles.
• Dry contact: enables connection to a compatible external alarm or building management system.
• Manual test circuit: supports inspection and maintenance of detection functions.

Thermal runaway classification and battery limits

The P rating relates to the maximum energy of one battery; the T1 rating specifies an external surface temperature-rise classification. Respect both the individual battery limit and total cabinet energy limit.

• P1000T1
• 1000 Wh / battery
• 1000 Wh / cabinet

Fire protection and construction

Fire-stop construction is specified as EI 15 in the catalogue. This is not a 90-minute EN 14470-1 cabinet. Double-wall steel with non-combustible insulation, self-closing reinforced doors and key locking.

Standards and conformity

RT362; P1000T1; IEC 61439-1 and IEC 61439-7 for applicable electrical assemblies; CE / Low Voltage Directive 2014/35/EU; EI 15 fire-stop construction as stated in the catalogue.

Technical specifications

CDV-A ventilation – highly recommended

CDV-A ventilation is highly recommended for lithium-ion battery charging where compatible. Air extraction is required under the applicable RT362 conditions to manage potentially toxic and flammable gases. If no suitable external extraction is available, a compatible extraction solution is necessary. CDV-A is a separately selected accessory and is not included in the base cabinet unless confirmed in the quotation. Verify compatibility and site requirements before installation.

Frequently asked questions

Can batteries be charged inside?

Yes, with compatible charging equipment and within the manufacturer’s electrical and battery-energy limits. The base cabinet does not necessarily include charging sockets; confirm the configuration.

What happens if the cabinet detects an incident?

The safety concept includes alarms and automatic charging-power disconnection to reduce escalation risks.

Is CDV-A ventilation included?

No. CDV-A is a recommended separately selected accessory where compatible; appropriate extraction may be mandatory.

How long is production?

Manufactured upon request. Estimated production lead time is 6–8 weeks, excluding transport.

Made to order, delivery and quotation

Manufactured in France upon request, with an estimated production lead time of 6–8 weeks. SALESBRIDGES supplies lithium-ion battery charging safety cabinets in the Netherlands and across Europe. For a technical configuration, ventilation assessment or B2B quotation contact [email protected] or +31 6 52883848.